FDA Tightens Arsenic, Heavy Metal Rules for Food and Water
The Thai FDA has tightened regulations on arsenic and heavy metals in food, bottled water, and ice to safeguard public health. New measures require producers to use safe water sources, install certified filtration systems like reverse osmosis or ion exchange, and conduct regular efficiency testing. Contaminants are colorless, odorless, and tasteless but can cause serious long-term health effects including cancer and organ damage.
The Thai Food and Drug Administration (FDA) is tightening controls on arsenic and heavy metals in food, drinking water, and ice to protect public health. On November 20, 2026, FDA Secretary-General Supatra Boonserm revealed that arsenic and certain heavy metals can dissolve in water without color, odor, or taste, making them undetectable. Long-term or high-level exposure can affect the nervous system, liver, kidneys, and increase cancer risks. The FDA continues to enforce quality control on food and consumable water products. Bottled water and ice must comply with Ministry of Public Health Notification No. 462 (2025), limiting arsenic to 0.01 mg/L, along with cadmium, mercury, and lead standards. Food and ingredients must meet Notification No. 414 (2020) on contaminant standards. Supatra outlined measures for producers: 1) Select raw water sources carefully — use tap water or water filtered for arsenic and heavy metals; avoid surface water from rivers in high-risk provinces, groundwater near mines, heavy industry, toxic waste, or industrial slag. Boiling does not remove arsenic or heavy metals. 2) Use equipment and technology that can filter arsenic and heavy metals: reverse osmosis (RO) systems (0.0001 micron membrane, 95-99% removal, requires regular membrane integrity checks); ion exchange systems (anion exchange resin for arsenic/heavy metals, monitor electrical conductivity); adsorption media (activated alumina or iron-based media, effectiveness depends on pH and fluoride/phosphate levels); oxidation and filtration (chlorine/ozone to convert arsenic, then iron/sand filtration, suitable for large factories, also removes lead, copper, manganese, but not cadmium, mercury, or nickel). 3) Regularly verify filtration material and equipment efficiency with simple test kits before and after filtration.